Gaoge-Tech Instrument Co., Ltd.


To be your reliable partner for Quality testing and R&D

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsBattery Testing Machine

IEC62133 Battery Testing Machine For Battery External Fire Burning Test 3A Fuse

Good quality Environmental Test Chamber for sales
Good quality Environmental Test Chamber for sales
A smart testing machine, easy for our funiture quality testing.


We are well satisfied for these Climatic chambers, a nice testing solution for our lab.

—— Garza·QC Manager

I'm Online Chat Now

IEC62133 Battery Testing Machine For Battery External Fire Burning Test 3A Fuse

China IEC62133 Battery Testing Machine For Battery External Fire Burning Test 3A Fuse supplier

Large Image :  IEC62133 Battery Testing Machine For Battery External Fire Burning Test 3A Fuse

Product Details:

Place of Origin: CHINA
Brand Name: GAOGE
Certification: CE/ISO9001
Model Number: GAG-3008

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotation
Packaging Details: Standard Export Wooden Case (Plywood)
Delivery Time: 15 working days after received your payment
Payment Terms: T/T, Western Union
Supply Ability: 15 sets per month
Contact Now
Detailed Product Description
Model Number: GAG-3008 Applicable Industry: Battery Industry
Standard: QC/T 743-2006,QC/T 744-2006,GB/T 31467.3-2015 Material: #SUS 304 Stainless Steel
Burn Time: 0~ 999.9±0.1s Test Cover: Aluminum,Width Of 610mm
Power Supply: AC380V, 50Hz, 10A Power: Electronic
High Light:

automotive battery testing equipment


cell phone battery testing equipment



IEC62133 Battery Pack Cell Battery External Fire Burning Testing Safety Test



Battery Burning Tester is suitable for mobile phone, notebook computer and other small electronic consumer products battery fire resistance/flammability testing. This machine is to screen fixed on the above 38.1mm from the burner at the top of the screen, each 25.4mm has 20 eyelets, wire diameter 0.25mm; igniting the burner, and the burning of the battery, or until the battery explosion or battery burned, and the burning timing.



Model GAG-3008
Burner The UL burner, caliber diameter 9.5mm or 38mm, length 100 mm
Flaming combustion time 0~ 999,999 seconds ±0.1second
Flame height 10~75±2mm
Testing Cover Width 24″(610mm) , octagon shape(could be customized)
Test cover highly 12″(305mm) (could be customized)
Ignition devices Automatic ignition (remote control type control 8 meters of less than effective)
Burning gas Propane gas, Liquefied petroleum gas or methane
Mesh Material Stainless steel
Working temperature range 0ºC~40ºC
Power supply AC 220V/50HZ
Consumption ≤300W
Fuse 3A
Safety indicators Insulation resistance: shell, power input terminal are greater than 2MΩ.
Pressure resistance: 1 seconds resistance voltage 1750V
between the input power supply and the shell, whole current 10mA
Grounding: the power grounding electrode, the resistance between
the shells is less than 0.1Ω
Fire extinguisher manual CO2 fire extinguisher
Customized service Welcome to Non-standard, Special requirements, OEM/ODM orders.



1. Because of the certain danger of burning test, in order to protect, all the operation of this test should be tested in the room separated from the observer.
2. When do flame exposure test, the test sample cell or battery should be placed on a small wire net horizontally covered by the test base. Before the test, adjust the position of the burner make the wire mesh on the above 38.1mm from the burner. After adjusting the location, ignite the flame, when the steel wire mesh is red, use crucible clamp to hold the test sample and place it on the wire mesh to burn until the battery explodes or burn down.
3. When do particles burning test, first remove the octagon protection cover and the top cover, put the test sample cell or battery on the wire net on the test base , adjust the gas and air flow rate, make the burner produces bright blue flame and the steel wire net burning into bright red (approximately about 700 ºC), place the gauze screen according to standard requirement(the gauze screen prepared test handle), burning until lithium battery explosion or burn down.
4. When do projectile test, It is required that cover the octagon protection cover and the top cover on the sample. The sample is placed on the steel wire net on the top of the test base, heating the sample until the sample explodes or the lithium burns down.



UL 2272-2016 Outline of investigation of electric balance car
UL 2271-2013 Battery for light electric vehicle
GB/T 31241-2014 Safety requirements for lithium ion battery and battery pack for portable electronic products
GB/T 18287 -2013 External short circuit requirements of General specification for lithium ion batteries for cellular telephones
GB/T 8897.4-2008 The fourth part of the primary battery safety requirements of lithium batteries
YD/T 2344.1-2011 Lithium iron phosphate batteries for communication - part one: integrated batteries
GB/T 31485-2015 Safety requirements and test methods for power batteries for electric vehicles
GB/T 21966-2008 Safety requirements for lithium primary batteries and batteries in transit
MT/T 1051-2007 Lithium ion battery for miner's lamp
YD 1268-2003 Safety requirements and test methods for lithium batteries and chargers for mobile communication handsets
GB/T 19521.11-2005 Safety code for inspection of hazardous properties of lithium batteries
YDB 032-2009 Backup lithium ion battery pack for communication
UL 1642:2012 Lithium battery standard
UL 2054: 2012 Household and commercial storage battery
UN38.3(2012) Recommendations on the transport of dangerous goods - Test and standard manual part 3
IEC62133-201 Safety requirements for battery and storage battery with alkaline
or non acid electrolytes
IEC 62281: 2004 Safety requirements for lithium primary batteriy and battery pack in transit
IEC 60086: 2007 Primary battery part 4 safety requirements of lithium battery
GJB150,GJB360,GJB548,GJB1217,MIL-STD-810F,MIL-STD-883E etc.test specification.


IEC62133 Battery Testing Machine For Battery External Fire Burning Test 3A Fuse

Contact Details
Gaoge-Tech Instrument Co., Ltd.

Contact Person: Mr. Jim Luo

Tel: 86-769-85885105

Fax: 86-769-85033995

Send your inquiry directly to us (0 / 3000)