Payment & Shipping Terms:
|Model Number:||GAG-5626||Elevation Speed:||10~300mm/min Optional|
|Clamping Board Expansion Width:||200~2000mm||Corrector Of Force:||Force Value Display Used To Correct Clamping Force|
|Baseboard Dimension:||W*D 1500*1500mm||Device Width:||Less Than 2.5m|
|Specimen Shape:||Parallelepiped Transport Package||Power:||Electronic|
Clamps Holding ISTA Testing Machine F Clamp 1000mm Bags Packaging Carton Clamp Testing
The machine simulates the process the Schnabel car discharge the package, during this process, the clamping force of both boards will affect the package and cargo. And this test is to evaluate the resistance property of the package toward this clamping force.
|Specimen shape||Parallelepiped transport package|
|Maximum specimen weight||600kg|
|Clamping pressure force||According to the transport diagram on the test sample, the operator can add 400-3000Lb (adjustable) pressure force on the corresponding surface.|
|Clamping plate size||Height 48inch X depth 48inch|
|Clamping plate adjustable height||0~1000mm|
|Base plate dimension||2200 X 2100mm|
|Motor||Panasonic Servo Motor|
|Clamping plate requirement||Make the two clamping boards flat and non-deform under work condition (2000 Pounds) and make clamping boards' parallel and clamping board and land vertical. Clamping board is thicker than 25mm.|
|Clamping force rate||0.25-2.5mm/sec (according ISTA 6- SAMS CLUB)|
|Force corrector||It displays force value and is used to calibrate clamping force.|
|Calibration accuracy||±1% F.S|
|Device width||Less than 2.5m|
|Controller:||touch screen type, which can control & display the speed and force|
|Function||the clamp can be up and down|
|Control||Computer controlled type|
1. Strength test:
Strength test which belongs to a destructive test is mainly used to measure the deformation when The sample is loaded with maximum pressure or crushing strength.
2. Constant Value Test:
There are two parameters which are to be set to the constant value test: Load force value and Deformation value. The user can set one or both of them according to the practical requirement; The Measurement is complete when any parameter reaches the set value.
3. Stacking Test:
Stacking Test is used to check up that whether the sample can endure a constant pressure in a given Time period. Set up two parameters: Compressive strength and testing time (hour. When the test Starts, the system will check the current pressure at any moment to ensure the set value; The measure is complete when the test time is expired or the deformation value exceeds the set one Within testing time.
4. The overall system is in good parallelism, stationary and high return speed.
TAPPI-T804, JIS-20212, GB4857.3.4, ASTM-D642
Corrugated board boxes and Cartons, Plastic Packaging, Wooden box.