Payment & Shipping Terms:
|Model Number:||GAG-5626||Usage:||Clamping Test, Clamp Test|
|Specimen Shape:||Paralleled Transport Package||Maximum Specimen Weight:||500kg|
|Clamping Pressure Force:||400~3000 Lb||Clamping Board Size:||(H*D) 48*48inch|
|Clamping Board Adjustable Height:||0~500mm||Power:||Electronic|
Transport Stimulation Carton Box Clamping Force Testing Machine With Automatic PLC Control
The machine simulates the process the Schnabel car discharge the package, during this process, the clamping force of both boards will affect the package and cargo. And this test is to evaluate the resistance property of the package toward this clamping force.
|Specimen shape||Parallelepiped transport package|
|Max. Specimen weight||500kg|
|Clamping pressure force||According to the transport diagram on the test sample, the operator can add 400~3000Lb (adjustable) pressure force on the corresponding surface|
|Clamping board size||H*D 48*48inch|
|Clamping board adjustable height||0~500mm|
|Elevation speed||10~300mm/min optional|
|Clamping board expansion width||200~2000mm|
|Baseboard dimension||W*D 1500*1500mm|
|Clamping board requirement||Make sure the two clamping board are flat, parallel and non-deform under the work condition(2000Pound) and clamp board and land are vertical. Clamping board thickness no less than 25mm.|
|Corrector of force||Force value display used to correct clamping force|
|Force precision||National standard 1.6 level|
|Operation||Manual operating rod simulates fork truck actual operating actions such as clamping control, opening, lifting up, lifting down or automatic switching mode operation (clamping board thickness no less than 25mm)|
|Device width||Less than 2.5m|
1. Strength test:
Strength test which belongs to a destructive test is mainly used to measure the deformation when The sample is loaded with maximum pressure or crushing strength.
2. Constant Value Test:
There are two parameters which are to be set to the constant value test: Load force value and Deformation value. The user can set one or both of them according to the practical requirement; The Measurement is complete when any parameter reaches the set value.
3. Stacking Test:
Stacking Test is used to check up that whether the sample can endure a constant pressure in a given Time period. Set up two parameters: Compressive strength and testing time (hour. When the test Starts, the system will check the current pressure at any moment to ensure the set value; The measure is complete when the test time is expired or the deformation value exceeds the set one Within testing time.
4. The overall system is in good parallelism, stationary and high return speed.
ASTM D642 ISTA 6- SAMS CLUB ISTA 3J
Corrugated board boxes and Cartons, Plastic Packaging, Wooden box.