|
Product Details:
Payment & Shipping Terms:
|
Model Number: | GAG-6006 | Type: | Rubber Mixer |
---|---|---|---|
Operating Type: | Cycle Operating | Layout Type: | Horizontal |
Control Type: | PLC | Condition: | New |
Power: | Electronic | Power Source: | 380V/50Hz |
High Light: | quality control lab equipment,rubber testing equipments |
75 L Laboratory Rubber Mixer/Rubber Dispersion Kneader For Shoes Footwear Industry
Description
Laboratory Kneader offers general purpose kneading of high-to super high-viscosity materials. The kneading effect(kneading, crushing, dispersing) is maximized by the powerful shear force generated between the two strong blades and between the blades and kneading trough. Cooling, heating, and vacuum/decompression are also possible (as options). A flushing-type kneader (flusher), which operates with heat vacuum/decompression, is also available as an option.
Industries we supplied:
Specifications
Model | GAG-6006-1 | GAG-6006-3 |
Total volume of mixing chamber (L) |
3 | 8 |
Working volume of mixing chamber (L) |
1 | 3 |
Driving motor power (KW) |
4 | 5.5 |
Tilting motor power (KW) |
0.2 | 0.55 |
Tilting angle (°) | ≤140 | 135 |
Rotational speed of the rotor (front/rear) r/min |
12-58 | 6-60 |
Pressure of compressed air (MPa) |
0.5-0.8 | 0.5-0.8 |
Capacity of compressed air(m3/min) |
≥0.3 | ≥0.3 |
Weight Kg | 800 | 2000 |
Features
1. The plastic material in airtight plastic pressure under the condition of refining or mixed refine, high production efficiency, low labor strength, stable quality. The two edges rotor shearing type, the production process the plastic materials that can be fully torn make the material shear well reach dispersion and evenness.
2. The edges of the rotor peak surfacing wear-resisting hard alloy and mixing rubber room and material part of the contact all use hard chromium plating fine polishing processing. Mixed refine chamber adopts clip set of type structure, can be out water/steam/medium oil, have good cooling or heating effect, adapt to all kinds of refined rubber refining technological requirements of the plastic.
3. From the back door charging, mixing rubber room maximum flip 140 ° forward unloading, and according to the customer requirement of the process can be arbitrary regulation Angle, facilitate next process of connection.
4. The switch on the "w" type, facilitate materials can be fully mixing rubber or refining.
5. The electric control system the programmable logic controller (PLC), has the alarm, unloading operation, manual/automatic conversion, chain security protection function.
Applicable Industries
Bags and Suitcases Handle Jerk Testerappliedto all kinds of bag manufacturers. To improve products quality according to test results.