Payment & Shipping Terms:
|Inner Box Material:||304 Stainless Steel Plate, The Bottom To Strength||Temperature Control System:||Temi880 Or Temi580|
|Load Resolution:||1/10000||Inner Box Size:||500x500x600mm (length X Width X Hei|
Programmable Lithium Ion Battery Testing Machine Internal Short Circuit Tester GAG-H216 500x500x600mm (length x width x
|Temperature control system technical parameters|
|temperature range||-10 ºC ~ 100 ºC|
|analytical accuracy||0.1 ºC|
|temperature fluctuation||± 0.5 ºC|
|temperature uniformity||± 2 ºC|
|heating rate||3 ºC / min|
|cooling rate||1 ºC / min|
|inner box size||500x500x600mm (length x width x height)|
|inner box material||304 stainless steel plate, the bottom to strength|
|Outside size||1050x1500x2100mm (length x width x height)|
|Temperature control system||TEMI880 or TEMI580|
|The pressure system technical parameter|
|test load||commonly used 80Kg (maximum 100Kg)|
|unit conversion||Kg, lb, N|
|load accuracy||FS ≤ ± 0.5%|
|displacement accuracy||± 0.05mm|
|speed range||0.01 ~ 20mm / s adjustable (commonly used test speed 0.1mm / s)|
|test plane||200x200mm (can be customized)|
|the voltage acquisition range||0 ~ 20V|
|the voltage acquisition frequency||100 times / s|
|indenter size||5x5x2mm or 10x10x2mm or 10x10x15mm|
|indenter material||Nitrile butadiene rubber,acrylic each one piece|
3.1 Temperature control box :
(1) Perfect modeling design: the arc shape and surface coating processing, elegant appearance, fitted with safe handle, easy to operate, reliable and safe.
(2) Bright, broad field of vision of large observation window: use double vacuum coating Windows and energy-saving fluorescent philips lamps, no need wiper mist, keep clear observation of the effect of the sample (s) to observe the situation.
(3) Advanced and reliable refrigeration and control system: closed compressor imported from Europe and the United States, imported eco-friendly refrigerant, the world famous brand refrigeration devices, original imported LED button type controller, and the operation is simple to learn.
(4) Has the function power off to stop function.
(5) Has a fault alarm, test-over alarm
(6) Exhaust emissions system: on the top of chamber, fitted with exhaust vent and powerful exhaust fan. Vent is closed when not in use, open when waste gas discharge. Waste gas can be quickly outside.
3.2 Pressure test system:
(1) Power system:
Japan panasonic ac servo motor
Panasonic ac drives
the worm gear and worm reducer
high precision ball screw imported from Taiwan.
(2) Control system:
using Pulse Command control mode control more accurate;
speed control range: 0.01 to 200 mm/S.
the intermediate plate adjustment can be fast rough adjustment and fine tuning.
After testing, automatically return to the origin, automatic storage;
(3) Data transmission mode:
the RS232 transmission.
One-step and precision seven-step dual force linear calibration system.
test interface software which can be set speed, displacement, load, and holding time
Settable load rate, stress rate, strain rate and multi-stage control mode can be meet with different testing requirements.
(4) Safety device:
the overload emergency stop device;
travel up and down limit device;
automatic breakpoint stop function.
(5) Stop function:
Stop function to voltage. When tested battery is connected with external voltage. The testing machine can be set voltage value to shutdown. Output signal when voltage of two ends of battery reduces to set value, and system will stop action.
|QC/T 743-2006||Lithium ion battery for electric vehicle|
|QC/T 744-2006||Metal hydride nickel batteries for electric vehicles|
|GB/T 31467.3-2015||Lithium ion power battery pack and system for electric vehicle - Part 3: Safety requirements and test methods|
|GB/T 31485-2015||Safety requirements and test methods for power batteries for electric vehicles|
|GB/T 31241-2014||Safety requirements for lithium ion battery and battery pack for portable electronic products|
|GB/T 8897.4-2008||Part 4 of the primary battery safety requirements of lithium batteries|
|YD/T 2344.1-2011||Lithium iron phosphate batteries for communication - part one: integrated batteries|
|GB/T 21966-2008||Safety requirements for lithium primary batteries and batteries in transit|
|MT/T 1051-2007||Lithium ion battery for miner's lamp|
|YD 1268-2003||Safety requirements and test methods for lithium batteries and chargers of mobile communication handsets|
|GB/T 19521.11-2005||Safety code for inspection of hazardous features of lithium battery pack|
|YDB 032-2009||Backup lithium ion battery for communication|
|UL 1642:2012||Lithium battery standard|
|UL 2054: 2012||Household and commercial battery pack|
|UN38.3(2012)||Recommendations on the transport of dangerous goods-Test and standard manual part 3|
|IEC62133-201||Safety requirements for battery and storage battery with alkaline or non acid electrolytes|
|IEC 62281: 2004||Safety requirements for lithium primary batteriy and battery pack in transit|
|IEC 60086: 2007||Primary battery part 4 safety requirements of lithium battery|
Free Pre-Sales Consulting
20 Days Quick Delivery
1 Year Quality Guarantee
12 hours Quick Feedback & After-Sales Service
Quick Back-up Parts Available & Technical Assistance
Free Training Service
Special Designing, Customized, OEM Order is accepted
16.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.