Payment & Shipping Terms:
|Model Number:||GAG-5626||Usage:||Clamping Test, Clamp Test|
|Elevation Speed:||10~300 Mm/min (optional)||Clamping Board Expansion Width:||200~2000 Mm|
|Baseboard Dimension W*D:||1500*1500 Mm||Clamping Pressure Force:||According To The Transport Diagram On The Test Sample|
|Clamping Board Adjustable Height:||0~500mm||Power:||Electronic|
packaging testing instruments,
paper testing machine
ISTA Packaging Clamp Testing Machine For Large Carton Box Resistance
Carton Package Strength Clamp Test Machine used for measuring the pressure strength of boxes, cartons, packaging containers, etc. for inspecting the pressure-resistance and strike-endurance of packing materials during transportation or carry. Also, it can do hold pressure stacking test, It's equipped with 4 precise Load Cells for detection. The testing results are displayed by the computer. The main technical parameters Corrugated Box Compression Tester.
|Unit (switchable):||Kg, Lb, N|
|Return velocity:||250 mm/min (maximum)|
|Test Space (L×W×H):||1000×1000×1000 mm|
|Speed of Compression:||10 ± 3 mm/min|
Serial number, Peak value, Average value, Designated holding pressure
value; all memorable
|Structure:||AC frequency conversion motor ( Taiwan); an Ordinary screw rod|
|Dimension (L×W×H):||1495×1300×1520 mm|
|Weight:||Approx. 690 kg|
Overload protection, overvoltage protection & limited position
1. Strength test:
Strength test which belongs to a destructive test is mainly used to measure the deformation when The sample is loaded with maximum pressure or crushing strength.
2. Constant Value Test:
There are two parameters which are to be set to the constant value test: Load force value and Deformation value. The user can set one or both of them according to the practical requirement; The Measurement is complete when any parameter reaches the set value.
3. Stacking Test:
Stacking Test is used to check up that whether the sample can endure a constant pressure in a given Time period. Set up two parameters: Compressive strength and testing time (hour. When the test Starts, the system will check the current pressure at any moment to ensure the set value; The measure is complete when the test time is expired or the deformation value exceeds the set one Within testing time.
4. The overall system is in good parallelism, stationary and high return speed.
ASTM D642 ISTA 6- SAMS CLUB ISTA 3J
Corrugated board boxes and Cartons, Plastic Packaging, Wooden box.