Payment & Shipping Terms:
|Load Capacity:||600 Kn||Load Accuracy:||Less Than %1|
Insulator Heat Machine Performance Testing Machine, Load Capacity 600 Kn
|GB/T 775.3-2006; Insulator test method Part 3 Mechanical test method|
|GB/T 1001.1-2003 overhead line insulators with nominal voltages above 1000V|
|GB/T 19519-2004 Composite insulators for AC overhead lines with nominal voltages above 1000V--Definitions, test methods and acceptance criteria|
|GB/T 22709-2008 Overhead line glass or porcelain insulator string components Residual strength after mechanical damage of insulator.|
|Thermomechanical performance test (type test)||Test procedure: The insulator element shall withstand four 24 h cooling and heating cycles and simultaneously apply a tensile load that is maintained between 60% and 65% of the specified electromechanical or mechanical failure load. In each 24h cycle, it should first be cooled to a temperature of 30 ° C 5C, and then heated to +40 ° C ± 50C. The temperature deviation of the cooling and heating cycles should be controlled to ensure a minimum temperature difference of 70 K between the recorded cooling and heating temperatures.
The maximum temperature and the minimum temperature should be maintained for at least 4 h in the temperature cycle. The speed of the temperature change is not really important, it depends on the test device. All temperatures should be measured on or near the metal attachment of one of the insulators.
A tensile load should be applied to the insulator at room temperature before starting the first hot and cold cycle. At the end of each heating period, the tensile load is completely removed and reapplied, except for the last thermal cycle. After the fourth 24 h cycle, it was cooled to room temperature to remove the tensile load.
Test function: The tensile test module can be used as a tensile test for insulators such as rated mechanical load and mechanical damage load test of composite insulators. At the same time, the heat engine test module is set up to perform a heat engine test with a temperature cycle of 4 cycles of 24 hours (96 hours total). The tensile test module and the heat test module can operate independently and should not have a significant impact on the other module during operation.
|Equipment type||The tensile test module and the heat test module are all controlled by microcomputer and vertical, and the control mode is loaded by electro-hydraulic servo technology.|
|Load capacity||KN 600|
|Load accuracy||less than %1|
|Temperature range||40 ° C - 100 ° C|
|Temperature fluctuation||±0.5 °C|
|Temperature uniformity deviation||± 2 ° C|
|Heating rate||≥2~3/min (no load)|
|Cooling rate||≥0.7~1/min (no load)|
|Actuator (piston) stroke (mm)||600mm|
|Oil cylinder configuration||1 group|
|Environment box||1 test space mm: 600 × 1200 × 750
2Material made of SUS304, then painted
|Specimen size (mm)||Diameter 380 Height 240|
|Beam displacement speed||0.5 ~ 80mm / min|
|Temperature range||-40 ° C ~ 100 ° C|
|Power source||AC / 380V, 5.5kW|
|Free Pre-Sales Consulting
GAOGE-TECH offer 12 hours quick pre-sales response and free consulting. Any kind of technical support is available for users.
We offer progressing solution design to all the users.
|20 Days Quick Delivery
We have mass production and stock & ready item, for these items, we offer 20 days quick delivery time. For big machine and special requirement, we will trade you as the priority customer and to produce your cargo for the first time.
|1 Year Quality Guarantee
GAOGE-TECH 1-year guarantee for our machine. And to become you are our long-term customer, we will prolong the quality guarantee period especially for you.
|12 hours Quick Feedback & After-Sales Service
We will offer "Training Video", "Instruction Book", "Operation Manual" to you, which is easy to learn and operate.
We will supply brochures for simple trouble-shootings of the machine, which will help you deal with the common problems happened to the machine.
We will offer plenty of technical support online, just like detailed technical and installation instructions. For example, when you meet a maintenance problem, we will make a video with completed and detailed operation process according to the problem, it just seems that I am on the spot by your side to instruct you how to deal with the problem.
|Quick Back-up Parts Available & Technical Assistance
Our extensive inventory of spare parts means replacements get shipped to you as quickly as possible. Immediate technical assistance is only an email or phone call away.
|Free Training Service
We insist that our customers receive personal, hands-on training with every machine we sell. This training is free, and we will work with you for as long as it takes to ensure you feel comfortable operating your machine. We pride ourselves on our expertise and our ability to educate our customers in the installation, proper maintenance, and most efficient use of GAOGE-TECH machines.
|Special Designing, Customized, OEM Order is accepted
GAOGE-TECH is rather willing to help you to realize your special testing and requirement by our innovative ability. So please do not hesitate to contact us when you need special design or customized machine and OEM machines.
16.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.