Payment & Shipping Terms:
|Control System:||7-inch Color LCD Touch Screen + PLC||Temperature Tolerance:||500 ~ 750 °C ± 10 °C; 750 ~ 960 °C ± 15 °C|
|Glow Wire Temperature:||RT+ 10°C ~ 1000°C Adjustable|
Normal temperature + 10°C ~ 1000°C Adjustable
1.The product introduction:
Parts or parts may reach excessive temperatures or ignite parts in their vicinity under fault or overload conditions. The glow wire test simulates the thermal stress caused by a heat source or ignition source such as a hot component or an overload resistor in a short period of time. The simulation technology assesses the risk of fire and is applicable to plastic and non-metallic insulating parts such as switch housings and relay sockets for electrical and electronic products, components and household appliances.
This model adopts PLC+ color LCD touch screen control, the operation interface is beautiful and easy to understand, and is equipped with a test data printer. The test conditions and test results can be printed out to facilitate the recording of test results.
2.Meet the standards: IEC60695 - 2 - 10 / 11 / 12 / 13, IEC60884-1, GB2099.1, IEC60335-1, GB4706.1, VDE0620
|Control system||7-inch color LCD touch screen + PLC (programmable controller), and equipped with test data printer|
|7-inch color LCD touch screen display, can set and display the timer (Ta) that applies the hot time, the timer that fires the burning time (Ti), the timer of the flame-off time (Te), the glow wire Temperature, print interface and operating status|
|Volume inside the box||≥0.5 cubic meters, with glass observation door|
|In-box illumination||less than 20LUX|
|Glow wire temperature||Normal temperature + 10°C ~ 1000°C Adjustable, temperature measurement adopts Ø0.5mm nickel-chromium armor (K type) imported thermocouple|
|Temperature tolerance||500 ~ 750 °C ± 10 °C; 750 ~ 960 °C ± 15 °C|
|The force applied by the glow wire to the sample||1.0 ± 0.2N, and the penetration depth is limited to 7mm ± 0.5mm|
|Glow wire is a standard size ring made of 4mm diameter nickel/chromium (80/20) wire; the diameter of the glow wire before it is bent is 4.0 +/- 0.04mm, after bending Reduced to 90%, other sizes are produced according to the error requirements of the standard requirements;|
|The moving speed of the top of the glow wire approaching and leaving the sample||10mm / s - 25mm / s;|
|0 ~ 99 minutes 99 seconds adjustable, accuracy: ± 1 second Hot time (Ta) can be set, light-off duration (Ti) and flame-off time|
|Free Pre-Sales Consulting
GAOGE-TECH offer 12 hours quick pre-sales response and free consulting. Any kind of technical support is available for users.
We offer progressing solution design to all the users.
|20 Days Quick Delivery
We have mass production and stock & ready item, for these items, we offer 20 days quick delivery time. For big machine and special requirement, we will trade you as the priority customer and to produce your cargo for the first time.
|1 Year Quality Guarantee
GAOGE-TECH 1-year guarantee for our machine. And to become you are our long-term customer, we will prolong the quality guarantee period especially for you.
|12 hours Quick Feedback & After-Sales Service
We will offer "Training Video", "Instruction Book", "Operation Manual" to you, which is easy to learn and operate.
We will supply brochures for simple trouble-shootings of the machine, which will help you deal with the common problems happened to the machine.
We will offer plenty of technical support online, just like detailed technical and installation instructions. For example, when you meet a maintenance problem, we will make a video with completed and detailed operation process according to the problem, it just seems that I am on the spot by your side to instruct you how to deal with the problem.
|Quick Back-up Parts Available & Technical Assistance
Our extensive inventory of spare parts means replacements get shipped to you as quickly as possible. Immediate technical assistance is only an email or phone call away.
|Free Training Service
We insist that our customers receive personal, hands-on training with every machine we sell. This training is free, and we will work with you for as long as it takes to ensure you feel comfortable operating your machine. We pride ourselves on our expertise and our ability to educate our customers in the installation, proper maintenance, and most efficient use of GAOGE-TECH machines.
|Special Designing, Customized, OEM Order is accepted
GAOGE-TECH is rather willing to help you to realize your special testing and requirement by our innovative ability. So please do not hesitate to contact us when you need special design or customized machine and OEM machines.
16.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.