|
Product Details:
Payment & Shipping Terms:
|
Model Number: | GAG-5188 | Usage: | Salt Spray Corrosion Test |
---|---|---|---|
Salt Water Tank Temp. Range: | Rt.-- 50degrees, +/-0.5degree | Salt Spray Vehicle: | Air+Acid Based Liquid |
Standards: | ASTM B117, GB/T2423.17 | Spray Volume: | 1.0~2.0ml/80cm2/H |
Material: | Imported PVC & PP | Power: | Electronic |
High Light: | plastic testing equipment,rubber testing machine |
Environmental Simulation ASTM Salt Spray Testing Machine For Material Quality Testing
Description
Salt spray test chamber is to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and greasing. It carries out the anti-corrosive treatment to test the corrosion resistance of the products.
1. The Laboratory Nozzle Salt Spray Corrosion Test Chamber is made of transparent materials so that the operator can see the tested sample in it and the spraying situation of the tested sample.
2. A waterproof structure is adopted between the chamber cover and chamber body, thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
4. Control System High precision P.I.D. temperature control meter with its error ±0.1°C.
Specifications
Button Model | GAG-60-1 | GAG-90-2 | GAG-120-3 | GAG-160-4 | GAG-200-5 | ||||
LCD touch screen Model | GAG-60A-1 | GAG-90A-2 | GAG-120A-3 | GAG-160A-4 | GAG-200A-5 | ||||
Inner size (mm) | W | 600 | 900 | 1200 | 1600 | 2000 | |||
D | 450 | 600 | 850 | 850 | 950 | ||||
H | 400 | 500 | 500 | 550 | 600 | ||||
External size (mm) | W | 1130 | 1460 | 1900 | 2300 | 2700 | |||
D | 630 | 910 | 1150 | 1150 | 1350 | ||||
H | 1070 | 1280 | 1500 | 1550 | 1600 | ||||
Lab Capacity(L) | 108 | 270 | 480 | 800 | 1440 | ||||
Saline Capacity(L) | 15 | 25 | 90 | 90 | 120 | ||||
Inside Temperature | (NSS ACSS) Test temperature : 35°C±1°C | ||||||||
(CASS) Test temperature : 50°C±1°C | |||||||||
Pressure Bucket Temperature | (NSS ACSS) Test temperature : 47°C±1°C | ||||||||
(CASS) Test temperature : 63°C±1°C | |||||||||
Brine Temperature | (NSS ACSS) Test temperature : 35°C±1°C | ||||||||
(CASS) Test temperature : 50°C±1°C | |||||||||
Test solution | NSS: pure water + Nacl (PH6.5~7.2) | ||||||||
CASS: Pure water + NaCl + CuCl (PH3.0~3.2) | |||||||||
Compressed Air Pressure |
2kgf/cm2 | 2kgf/cm2 | 6kgf/cm2 | 6kgf/cm2 | 6kgf/cm2 | ||||
Chamber Material | polyvinyl chloride (PVC) | ||||||||
Spray quantum | 1.0~2.0(ml/80cm2/h) | ||||||||
Safety device | Over-temperature protection , leakage protection | ||||||||
Heater | Corrosion-resistant titanium tube | ||||||||
Temperature sensor | Platinum Resistance (PT-100) | ||||||||
Power | AC 220V , 15A,1Ф, 50HZ |
Features
1. Adopt automatically and Manual adding water system, can watered by itself while lack of water.
2. adopt BoNute Principle which change saline water into atomization but no crystallization produced.
3. Double over-heat protection devise and alarm when water short storage to ensure use safety.
4. Local temperature and humidity inside and outside the box are used for A-level gray high-corrosive PVC, for salt spray, copper acetate, and other test specifications Test.
5. According to JIS, ASTM, CNS, GB standard parameter setting operation.
Standard
1.JIS H8502 IEC68-2-11
2.IEC68-2-52 1996 GB.10587-89
3.CNS.4158 CNS.4159 CASS
4. ASTM B-117, B-287,B-380
5.JIS D-0201, D-0205, H-8681, Z-2371, K-5400
6.DIN50021-75 MIL-STD-750