Payment & Shipping Terms:
|Cooling Method:||Compressor Refrigeration (-70ºC)or Liquid Nitrogen Refrigeration (-120 ° C)||Impact Hammer Line Speed:||2±0.2m/s|
|Weight (approx.):||320 Kg|
Embrittlement Testing Machine, Electronics Testing, 75cm×90cm×145cm
1.The product introduction:
This machine is used to check the plastic casing of the wire and the embrittlement properties of the vulcanized rubber during low temperature testing. The sample fixed on the test device is immersed in the low temperature medium for 5 minutes, and then the test piece is impacted by a punching head at a dry speed of 2±0.2 m/s, and finally the test is carried out at the lowest temperature for cracks, cracks, small holes. And whether it is separated into pieces.
It adopts two-stage compressor for rapid cooling and cooling, the lowest temperature can reach -70 °C (if it needs to be lower than -70 °C, liquid nitrogen can be connected to the spare heat exchanger interface, the lowest temperature can reach -120 °C ). The temperature controllability is high, and the liquid heat transfer medium in the low temperature tank can activate the stirring motor to make the temperature uniformity better. Four sets of samples can be tested, and the automatic rotating positioning fixture performs impact test on each set of samples to check the minimum temperature at which brittle failure occurs.
Meet the criteria: ASTM-D746: 2004-A, ASTM-D746: 2004-B, BS 903 A25: 1992, GB/T15256-94, GB/T5470-2008 (Type B), ISO 812-91, ISO 974 : 2000, JIS C3005-2000, JIS K 6723-1995, JIS K7216-1980 Type A, JIS K7216-1980 (Type B), ASTM D2137-05
|Cooling method||Compressor refrigeration (-70ºC)or liquid nitrogen refrigeration (-120 ° C)|
|Impact hammer line speed||2±0.2m/s|
|Impactor blade radius||1.6±0.1mm|
|The distance from the outside of the punch to the outside of the lower clamp||6.4±0.3mm|
|Impact position center of the punch to the outside of the upper clamp||8±0.3mm|
|Impact position center of the punch to the outside of the lower clamp||8±0.3mm|
The fixture radius under the test piece
|No round corners|
|The test piece can be automatically positioned by the cylinder|
|The test tank can be opened and closed by cylinder control|
|Weight (approx.)||320 kg|
|Power supply||3∮ AC 380V 50HZ (by country or designated))|
Heat transfer medium
|-60 °C (5 mm 2 / s viscous silicone fluid)|
|-70 °C (methanol or ethanol)|
|-120 °C (methylcyclohexane liquid cooled with liquid nitrogen)|
|Free Pre-Sales Consulting
GAOGE-TECH offer 12 hours quick pre-sales response and free consulting. Any kind of technical support is available for users.
We offer progressing solution design to all the users.
|20 Days Quick Delivery
We have mass production and stock & ready item, for these items, we offer 20 days quick delivery time. For big machine and special requirement, we will trade you as the priority customer and to produce your cargo for the first time.
|1 Year Quality Guarantee
GAOGE-TECH 1-year guarantee for our machine. And to become you are our long-term customer, we will prolong the quality guarantee period especially for you.
|12 hours Quick Feedback & After-Sales Service
We will offer "Training Video", "Instruction Book", "Operation Manual" to you, which is easy to learn and operate.
We will supply brochures for simple trouble-shootings of the machine, which will help you deal with the common problems happened to the machine.
We will offer plenty of technical support online, just like detailed technical and installation instructions. For example, when you meet a maintenance problem, we will make a video with completed and detailed operation process according to the problem, it just seems that I am on the spot by your side to instruct you how to deal with the problem.
|Quick Back-up Parts Available & Technical Assistance
Our extensive inventory of spare parts means replacements get shipped to you as quickly as possible. Immediate technical assistance is only an email or phone call away.
|Free Training Service
We insist that our customers receive personal, hands-on training with every machine we sell. This training is free, and we will work with you for as long as it takes to ensure you feel comfortable operating your machine. We pride ourselves on our expertise and our ability to educate our customers in the installation, proper maintenance, and most efficient use of GAOGE-TECH machines.
|Special Designing, Customized, OEM Order is accepted
GAOGE-TECH is rather willing to help you to realize your special testing and requirement by our innovative ability. So please do not hesitate to contact us when you need special design or customized machine and OEM machines.
16.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.