Electric Car Battery Charge Tester-Battery Discharge Test Equipment, Working Environment 0 ~ 35ºC

Electric Car Battery Charge Tester-Battery Discharge Test Equipment, Working Environment 0 ~ 35ºC

1.Description
This machine is suitable for lithium battery (or battery pack) flammability test. Drill a round hole with a diameter of 102 mm on an experimental platform and place a wire mesh on the round hole to place the measured battery on the wire mesh. Install an octagonal aluminum mesh around the pattern (then ignite the burner, heat the sample until the battery explodes or the battery burns, and the combustion process is timed.
Each test sample cell or battery is to be placed on a screen that covers a 102 mm (4 inch) diameter hole in the center of a platform table. The screen is to be constructed of steel wire mesh having 20 openings per inch (25.4 mm) and a wire diameter of 0.43 mm (0.017 inch).The screen is to be mounted 38 mm (1-1/2 inch) above a burner. The sample is to be heated and shall remain on the screen until it explodes or the cell or battery has ignited and burned out.

2.Specifications

3.Features
(1)Double columns design of hammer drop so as to reduce friction between hammer and the wall to achieve free falling, and effectively prevent the safety problems (The normal factory design is using brake motor which has major safety problems, The heavy hammer which hanging at the height possible automatically fall when the brake motor is power off, that will be safety problem of the operator.) Gaoge design effectively prevent the safety problem of this kind of the existence and appearance also perfect.
(2)Impact weights can be changed over, mounting, dismantling in an easy way that provides an excellent solution to treat the error due to secondary impacts and improve the test accuracy.
(3)The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
(4)Lighting system is designed to observe the internal testing process.
(5)Height can be display in a digital way with controllable height from 0-1200mm.
(6)Be equipped with the exhaust air vent (it is convenient for customers to discharge the odor produced in the battery test to the outside of the laboratory).
(7)Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety and Easy operation.
(8)Double-layer explosion-proof glass window and explosion-proof chamber.

4.Standard
GB/T31467.3-2015,GB/T31485.3-2015, B/T4857.5-92,IEC62133,UN38.3,ISO02448-1972E,QC/T743,QC/T744
SJ/T11170-1998; SJ/T11169-1998; UL1642-2009, UL2054:2008; UL1642:1995; UN38.3

Corporte partners
​
Company Certification

Company profile

Service Process

16.Packaging & Shipping




1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.