Payment & Shipping Terms:
|Green Car Power Battery Tester - Safety Crush And Needling Test:||1~ 50mm/S (Adjustable)||Crush Speed:||1mm/S-500mm/M(Adjustable)|
|Structure:||Horizontal||Crush/Nail-Penetrate Remaining Time:||0~99 Hours 99mins 99secs|
Battery Capacity Tester, Green Car Power Battery Testing Equipment
Power battery crush and puncture test machine have up to 50KN-5000KN pressure, Driving a large stroke cylinder by an independent hydraulic system, oil cylinder drives the extruding plate to do the test of the extruding and deformation of the battery. The test panel can be adjusted up and down slightly to obtain the best test position.
It could do both piercing and extrusion and can provide different extrusion deformation and duration according to the set program.
In the work, the corresponding program can be selected according to the purpose of the test, and get the test date you need.
Through real-time test data ( battery voltage, max, battery temperature, pressure voltage data) to test battery safety performance by crushing & nail-penetration and judge test result on the condition of no flame, smoke, explosion after test.
|Oil pressure stroke(mm)||500||800||1000||1000||3000||3000|
|Application of battery||Single battery cell or joint battery cell package(not applicable 3C battery cell)|
|Crush/Nail-penetrate space H*W*D(cm)||50*50*50||80*80*80||60*60*100||200*200*80||300*200*100||300*200*100|
|Nail-penetrate Speed||1~ 50mm/s (adjustable)|
|Displacement control Speed||0-25mm/s
regulation of proportional valve)
regulation of proportional valve)
|Temp.Sampling Range||0 ~ 1200ºC|
|Displacement control Accuracy||±1%|
|Crush/Nail-penetrate Remaining Time||0~99 hours 99mins 99secs|
|High Temp. Resistant Steel Needles||Diameter φ5mm~φ8mm(for battery cell);
Diameter φ6mm~φ10mm(for modular experiment)
|Control Method||PLC Touch Screen & Computer Remote Control|
|Safety Alarm Device||Electric leakage, Over temperature, Over voltage, Over loading,
Over current protection,abnormal sound light alarm,smoke alarm etc.
|Safety Device||Camera monitoring system,Fire-extinguishing system,Explosion-proof system,Smoke evacuation system,Explosion-proof lighting devices etc.|
|Customized service||Welcome to Non-standard, Special requirements, OEM/ODM orders.|
1. The wire coat is covered with metal fire tube which can effectively prevent the wire from burning caused by the ignition during the battery test;
2. It is equipped with a lighting lamp so that you can clearly see the status inside the test chamber
3. The acupuncture/squeeze speed (10~80mm/s) can be adjusted at will;
4. The acupuncture/squeeze force value (1KN~15KN) can be set at will, meeting different standard requirements;
5. Equipped with a test hole and two additional air outlets; the additional air outlets and the exhaust fan can more effectively and quickly exhaust the test waste gas and air pressure; the test hole is designed to detect the temperature or air pressure inside the test space;
6. The controller, isolated from the test chamber, can be operated 1~2 meters away, which can provide a certain safety measure.
GB/T 31467.3-2015,GB/T 31485-2015,GB 31241-2014,GB/T 18287 -2013,GB/T 8897.4-2008,YD/T 2344.1-2011,GB/T 21966-2008,MT/T 1051-2007,YD 1268-2003,GB/T 19521.11-2005,YDB 032-2009,UL 1642:2012,UL 2054: 2012,UN38.3(2012),IEC62133-2012,
IEC 62281: 2004,IEC 60086: 2007,GB/T 18332.2-2001 , MT/T 1051-2007, etc
Free Pre-Sales Consulting
20 Days Quick Delivery
1 Year Quality Guarantee
12 hours Quick Feedback & After-Sales Service
Quick Back-up Parts Available & Technical Assistance
Free Training Service
Special Designing, Customized, OEM Order is accepted
16.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.