Payment & Shipping Terms:
|Model Number:||GAG-6007||Ton:||25t, 50t, 80t, 100t|
|Working Layer:||500*500mm||Type:||General Rubber Machinery|
|Heating Plate Size:||300X300mm||Dimension(L*W*H):||1000x600x1500|
plastic testing instruments,
rubber testing machine
25T Laboratory Rubber Plate Vulcanizing Machine Hydraulic Press For Rubber Hydraulic Press
This vulcanizing machine is used for vulcanizing all kinds of rubber and plastic model products, and non-model products.
1. Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform, and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure.
2. We can design and manufacture all kinds of non-standard rubber machinery according to the requirements of the customers
|Hydraulic system working pressure||14.5MPa||16MPa|
|The maximum stroke of piston||80 mm||100mm|
|Lift speed of the piston||23mm/s||26mm/s|
|Heating method||Electric heating|
|Hot plate spacing||75 mm||125mm|
|Hot plate number||2layer|
|Hot plate size||350 mm×350 mm||400 mm×400 mm|
|Hot plate heating power||7.2 kW||9KW|
|Maximum Vapor pressure||0.6-0.8MPa||0.8MPa|
|Maximum Working Temperature||200℃|
|Maximum Vapor Temperature||170℃|
1. Rubber vulcanizing press is composed of hot plates, plates, up and down platforms, piston stroke, hydro-cylinder, hydraulic station and electrical control system. It can be equipped with push-pull mould device to move the mould on the machine.
2. Plates are constituted with welded steel plates through mechanical ball blast rust removal, spraying zinc rich series paint, shake to remove stress, then transferred into mechanical producing.
3. Hot plates are obtained by 35# steel plates after normalizing handling and then adopting double scale rolling. It is equipped with a set of electric control valves to realize the automatic adjusting of steaming temperature.
4. Up and down platforms adopt steel plates. In order to guarantee the make precision, it is applied with automatic cutting baiting, mechanical slicer producing welded groove, carbon dioxide gas shielded welding. It all adopts alloy welding wire welding and after welding takes the whole enter into a stove to go on the hot treatment to remove the welding stress exhaustively.
5. Hydro-cylinder adopts ZG270-500 and piston stroke adopts hard cold chilled alloy cast iron. And sealing structure applies the combined structure with double sealing ring and one dustproof ring to guarantee longer service.
6. Electrical control system adopts PLC automatic control to realize automatic closing, opening mould and gas exit equipment. The rubber vulcanizing press can also switch into the hand control.
|Digital temperature controller||Omron||Japan|
|Vacuum pump||Busch/ Rietschle||German|
|Solid state reply||Yangming||Taiwan|
This rubber vulcanizing press is used for all kinds of vulcanizing mould, rubber, and plastic.
This rubber vulcanizing press can be used in pertroleum industry to produce sealing parts.